Reducing water use in tanneries

LATEST / FEATURED ARTICLES

Nothing to Hide looks at the falling use of water in tanneries.

A natural resource, water is essential for life. Responsible consumption of water is a key priority for ensuring that an adequate, safe, clean supply is available for health, the environment and industry. Finding new and innovative ways to reduce pollution loads in industrial wastewater, improving the cleaning and treatment of wastewater to enable more recycling, and reducing the amount of water that is used to begin with, are all necessary components for future social and economic development within a more sustainable model.

According to UN-Water1, it is estimated that, globally, more than 80% of wastewater is released into the environment without adequate treatment. By the 2020s, the annual amount of water used across all sectors was approximately 4,600,000 million m3; 69% used in agriculture, 19% in industry and 12% in domestic use (UN/FAQ/Aquastat). Experts estimate that by 2050 total water consumption will rise by between 20% and 30% to as much as 6,000,000 million m3.

As stated in the original Nothing To Hide essay ten from Jutta Knoedler, the tanning industry is one of the main industries with a high-water consumption. This century-old statement can be read in nearly every thesis about water usage in tanneries. But does this indicate the industry has done nothing over the past few decades to reduce the amount of water it uses?

The leather value chain uses water at many stages of production and the amount used depends upon the type of tanning method adopted. For many years, leather technologists and experts have looked at ways to minimise the amount of water used, while at the same time finding better methods of treatment and recycling.

Water use is linked to other sustainability risks within leather manufacturing, such as use of chemicals and water pollution. If the amount of water used in the tanning process is reduced, you can also reduce the amount of chemicals that are needed and this, in turn, will reduce the amount of residual chemicals and pollutants to be treated. Wastewater treatment is a key priority for the industry for two reasons: first so that any wastewater returned to the environment is free from harmful chemicals and other pollutants and, second, so that there is the opportunity for recycling the same water back into tannery production or for irrigation use.

The leather industry has been actively working on water use minimisation for many years, however, up-to-date figures are not readily available. Where figures are available, The Sustainable Leather Foundation (SLF) records water usage metrics (alongside other sustainability criteria) and enables accurate, real-time information on trends and outcomes of new technology and process adoption. Using a benchmark average based on Leather Working Group award bandings, the only available data set that the industry had been assessed against previously2, SLF took the bronze bandings (as per July 2021) for the various categories of leather manufacture to provide a consistent starting point with current industry norms.

While SLF’s ‘Transparency Dashboard’ is still only one year old at the time of publishing this update, it already lists 27 tanneries and of those 27, the water usage data has consistently fallen well under the average benchmark that is being used currently.

Although the sample size is small, the range of facilities has a geographic spread that includes Argentina, Bangladesh, Brazil, Germany, India, Italy, Pakistan and Turkey and no single facility recorded a consumption level higher than the average benchmark data.

This data is also backed up by recent publications by the Italian national tanning industry association, UNIC, and the representative body of the European Leather Industry, COTANCE. In its 2021 sustainability report, UNIC reported that since 2003, water consumption among Italy’s leather manufacturing companies had dropped by 18% and that on average, 113 litres of water was required to produce one square-metre of finished leather. Similarly, in its Social and Environmental Report 2020, COTANCE reported that between 2016-2018, European tanneries consumed an average of 0.121 cubic metres (121 litres) of water to produce one square-metre of finished leather; this was 7% less than the average amount reported for the years 2010 and 2011.

To view the data set and read the full article, visit Nothing to Hide a source of in-depth essays and features about the Leather Industry.

This article first appeared on Nothing to Hide, our thanks to them for permission to reproduce part of it here.

ABONNIEREN SIE UNSEREN NEWSLETTER

Bleiben Sie mit Leather Naturally’s Berichterstattung über Produktinnovationen, Fertigungsentwicklungen und saisonale Trendberichte auf dem Laufenden.

Abonniere jetzt